Invisible Frame series

Environmental

MS modular walls can be demounted, re-cut, reinstall according to the needs of users.Installation will cause little noise and dust, and little construction waste will be produced.

Aluminum & steel components and glass can be recycle and reuse during the progress of production, achieving the goal of sustainable development.

Standard Panel Height

Wall heights of 8’to 12’are available as standard product the height range above is considered as regular engineering specials.

Standard Leveling Range

The structure allows a total of 20mm of adjustment at the top and bottom to ceiling deviation.It can easily be augmented with off the shelf hardware to accommodate most floor conditions. Standard Panel Widths 30″, 36″, 42″, 48″and 59″….custom sizes will be accommodated.

Glazing

Glazed claddings are double glass panes and prefabricated ready to install.

The tempered glass thickness is 5-6mm.The glass is equipped with a 20mm painted edge, they are standard in white or black paint finish and can be customized as a special.

The frame thickness is 74mm,the open cavity between modules allows the user to integrate building electrical, data and communications infrastructure.

Louvers

The width of louvers are 16mm or 25mm.The regular color is white, other width,color and pattern can be available as a special.

Floor and Ceiling Channel

Aluminum ceiling and floor channel is used to house the modules in a continuous line and to act as a plinth for both floor and ceiling alignment.They are standard in 7047 Telegrey paint finish and can be powder coated as a special.

Electrical, Data & Communications

MS will provide all electrical and data openings as required and can be either factory or site cut.